| | |  | Keyboard Effects and Pedals | | Home » » » | | | | | | | Description: | | A sustain pedal for Yamaha keyboards or any keyboard utilizing a sustain pedal with 1/4" connector | | | Features: | |
• This foot switch can be utilized as a sustain foot pedal or FS controller in synthesizers, tone modules and drum machines equipped with 1/4 phone plug
• Fitted with a 5 foot cable terminating in a 1/4 phone plug
| | | Product Details: | | | Product Length:
| 7.0 inches | | Product Width:
| 4.3 inches | | Product Height:
| 1.5 inches | | Product Weight:
| 0.93 pounds | | Package Length:
| 7.2 inches | | Package Width:
| 4.7 inches | | Package Height:
| 2.2 inches | | Package Weight:
| 0.7 pounds | | Average Customer Rating:
|  based on 1 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
Write an online review and share your thoughts with other customers.
4 of 4 found the following review helpful:
works fine if mountedMay 17, 2008
I'm using this with a Yamaha YPT-300 and it works fine except that the pedal is very light-weight. I kept having problems finding it with my foot or having it move. I found a piece of wood 9"x16"x3/4" (23 cm x 41 cm x 2 cm) and mounted the pedal to the board with double sided carpet tape. (Glue would work too.) I even put little rubber feet on the other side of the board. This setup works perfectly.
The YPT-300 senses the position of the mode switch when it is first turned on to determine if switch closed or switch open means sustain. This means it doesn't matter with the YPT300 that the switch will not be accessible when mounted to the board. Check your keyboard to verify this function and if it doesn't make this check, be sure the pedal mode switch is in the right position before gluing!
| | |
|
